
500kVA 400kW Natural Gas Power Generation Generator 60Hz 1800RPM
- Delivery Time:
- 30 Days
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
Place of Origin: | Chongqing, China (Mainland) |
---|
Product Description
Product Description
Specifications 500kVA 400kW Natural Gas Power Generation Generator 60Hz 1800RPM
RTA1340G2 Gas Engine 10 Cylinders V type
Alternator Meccalte
500kVA 400kW Natural Gas Power Generation Generator 60Hz 1800RPM
Standard Supply Scope: 1. Googol Gas engine with alternator, 480V, 1800rpm/1200rpm, 60Hz 2. Ignition System: Ignition controller, Ignition coil, Spark plug, High pressure wires, Sensor 3. Air/Gas Mix System: Air/gas mixer, Controller, Pressure sensor, NOx sensor 4. Governor System: Governor controller, Throttle, Sensor, 5. Detonation System: Detonation controller, Sensor 6. Cut off valve, Pressure regulator, Flame arrester 7. Gas Train: Cut-off Valve, Gas filter, Gas Regulator, Gas Control Valve 8. NOx Emission @ 100% load ≤500mg/Nm3 9. Gas Low Heat Value: ≥ 36MJ/Nm3 Applied Gas: Natural Gas, Biogas, City Sewage Gas, Landfill gas, Oil gas, farm biogas, Coal mine gas,etc Acceptable fuel gas pressure: 5~12kPa CH4 content: for natural gas≥85% CH4 ,content:for biogas≥40% Gas heat value≥5500kcal/Nm3 (23MJ/Nm3 ). Genset output power will increase as the gas heat value increase, if use low heat value gas for fuel (Heat value<5500kcal/Nm3, it will lower the power efficiency. Gas doesn’t include free water or free materials (the size of impurities should be less than 5μm.) H2S content≤200mg/Nm³ NH3 content≤20mg/Nm³ Impurities content≤30mg/Nm³;size≤5μm Water content≤40g/Nm³, no free water. Acceptable working conditions: Ambient temperature : -10°C~+40°C (antifreeze or preheater needed for below 0°C) Relative humidity:<90%(20°C) Altitude:≤1000m Normal working conditions: Genset can run at rated power on the conditions: Atmospheric Pressure: 100kPa, Ambient Temp: 20°C, Relative Humidity: 30%.
RTA1340G2 Gas Engine 10 Cylinders V type
Alternator Meccalte
500kVA 400kW Natural Gas Power Generation Generator 60Hz 1800RPM
Engine Model | RTA1340G2 | |
Rating Speed | rpm | 1800 |
Frequency | Hz | 60 |
Generator Output (COP) | kW | 400 |
Power Factor | 0.8 | |
Gas Engine Parameter | ||
Engine Output (COP) | kW | 438 |
Air Ratio | λ | 1.7 |
Configuration | 12 Vee | |
Displacement | l | 21.9 |
Bore | mm | 128 |
Stroke | mm | 142 |
Compression Ratio | 12:1 | |
Piston Speed | m/s | 8.52 |
Number of Flywheel Teeth | 160 | |
Flywheel House Size | SAE1-14 | |
System Parameter | ||
Oil Capacity | l | 90 |
Max. Allowed Oil Temperature | °C | 110 |
Oil Pressure Warning | kPa | 200 |
Oil Pressure Shutdown | kPa | 160 |
Coolant Capacity for Engine | l | 44 |
Max. Coolant Warning Temperature | °C | 90 |
Max. Coolant Shutdown Temperature | °C | 95 |
Max. Intercooler Outlet Temperature | °C | 50 |
Flow of Coolant pump (JW) | m³/h | 30 |
Flow of Coolant pump (LT) | m³/h | 14 |
Max. Exhaust Temperature | °C | 535 |
Exhaust Flow | kg/h | 1708 |
Exhaust Flange Diameter | mm | 2*125 |
Charging Alternator Capacity | A | 35 |
Starting Voltage | V | 24 |
Thermal Balance | ||
JW Coolant Heat | ±8% kW | 226 |
CAC Intercooler Heat | ±8% kW | |
Exhaust Heat up to 120°C | ±8% kW | 272 |
Energy Input | kW | 1078 |
ELectrical Efficiency | % | 37.1 |
Mechanical Efficiency | % | 39.2 |
Thermal Efficiency | % | 46.2 |
Total Efficiency | % | 83.3 |
Gas Consumption | MJ/kWh | 9.70 |
Generator Parameter | ||
Generator Model | ECO40-2S/4 | |
Generator Prime Output | kW | 432 |
Generator Efficiency @ 0.8PF | 94.7% | |
Genset Dimension | ||
Length | mm | 3600 |
Width | mm | 1500 |
Height | mm | 2000 |
Genset Weight | kg | 4300 |








Related Keywords
Related Keywords