Motorcycle ignition coil accessories general
-
$7.21≥2 Piece/Pieces
- Min. Order:
- 2 Piece/Pieces
- Min. Order:
- 2 Piece/Pieces
- Transportation:
- Air, Express
- Port:
- chongqing
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
| Place of Origin: | China |
|---|---|
| Productivity: | 20000 Piece/Pieces per Month |
| Supply Ability: | 20000 Piece/Pieces per Month |
| Payment Type: | L/C,T/T,D/P,D/A,Paypal |
| Incoterm: | FOB |
| Transportation: | Air,Express |
| Port: | chongqing,, |
Product Description
Product Description
The normal operation of the engine is inseparable from the ignition system, and accurate ignition timing and sufficient ignition voltage are the necessary conditions to ensure the normal combustion of the fuel mixture in the cylinder. Under different working conditions, the electronic control unit determines the best ignition time, and the performance of the motorcycle ignition coil is the key to determine the ignition voltage!
After the motorcycle ignition coil has been used for a long time, the ignition coil will gradually fail, resulting in a drop in ignition voltage. The spark from the motorcycle spark plug is weak, and the ignition capacity is insufficient, resulting in unstable idling, intermittent flameout, and even ignition difficulties. When a vehicle fault is found, the ignition coil should be checked and replaced as soon as possible. So, what are the faults of ignition coil of Motorcycle Vehicle Accessories?
Five major manifestations of ignition coil failure:
1. When the fault voltage of an ignition coil is insufficient, the corresponding cylinder will stop working, resulting in the vehicle idling jitter, weak accelerator pedal, and the fault light on;
2. If the ignition coil leaks electricity, the vehicle may shake at idle speed, but it will shake when the accelerator is pressed, and the power is insufficient;
3. When stepping on the accelerator to accelerate, the ignition coil is powered off, resulting in weak acceleration;
4. The fuel mixture that is not ignited will be discharged by the exhaust pipe. Under the high temperature of the exhaust pipe, the fuel mixture may be ignited and burned, resulting in the blockage and failure of the three-way catalyst, and the emission will deteriorate;
5. The failure of ignition coil will also cause the engine vibration to intensify, and the gasoline smell in exhaust gas is large.
Troubleshooting and solution of ignition coil fault
The aging of the insulation layer or the damage of the switch triode are the main reasons for the damage of the ignition coil, while the increase of the spark plug gap will lead to the increase of the main coil load and excessive heating, thus accelerating the aging of the insulation layer. If the spark plug gap becomes smaller, the discharge current of the secondary coil will increase, the heating will be too large, and the aging of the insulation layer will be accelerated.
The ignition coil manufactured by the assembly process may have quality problems such as poor durability of insulation materials, large internal resistance of the coil, large heat, poor quality of the triode, and short service life. Therefore, it is more reliable to integrate the design, coil and module packaging into one ignition coil.
After the motorcycle ignition coil has been used for a long time, the ignition coil will gradually fail, resulting in a drop in ignition voltage. The spark from the motorcycle spark plug is weak, and the ignition capacity is insufficient, resulting in unstable idling, intermittent flameout, and even ignition difficulties. When a vehicle fault is found, the ignition coil should be checked and replaced as soon as possible. So, what are the faults of ignition coil of Motorcycle Vehicle Accessories?
Five major manifestations of ignition coil failure:
1. When the fault voltage of an ignition coil is insufficient, the corresponding cylinder will stop working, resulting in the vehicle idling jitter, weak accelerator pedal, and the fault light on;
2. If the ignition coil leaks electricity, the vehicle may shake at idle speed, but it will shake when the accelerator is pressed, and the power is insufficient;
3. When stepping on the accelerator to accelerate, the ignition coil is powered off, resulting in weak acceleration;
4. The fuel mixture that is not ignited will be discharged by the exhaust pipe. Under the high temperature of the exhaust pipe, the fuel mixture may be ignited and burned, resulting in the blockage and failure of the three-way catalyst, and the emission will deteriorate;
5. The failure of ignition coil will also cause the engine vibration to intensify, and the gasoline smell in exhaust gas is large.
Troubleshooting and solution of ignition coil fault
The aging of the insulation layer or the damage of the switch triode are the main reasons for the damage of the ignition coil, while the increase of the spark plug gap will lead to the increase of the main coil load and excessive heating, thus accelerating the aging of the insulation layer. If the spark plug gap becomes smaller, the discharge current of the secondary coil will increase, the heating will be too large, and the aging of the insulation layer will be accelerated.
The ignition coil manufactured by the assembly process may have quality problems such as poor durability of insulation materials, large internal resistance of the coil, large heat, poor quality of the triode, and short service life. Therefore, it is more reliable to integrate the design, coil and module packaging into one ignition coil.
Related Keywords
Related Keywords
You May Also Like
You May Also Like
