Motorcycle accessories LED turn signal
$10.00 - $60.00/Piece/Pieces
- Min. Order:
- 1 Piece/Pieces
- Min. Order:
- 1 Piece/Pieces
- Transportation:
- Air, Express
- Port:
- chongqing
Quantity:
Your message must be between 20 to 2000 characters
Contact NowBasic Info
Basic Info
| Place of Origin: | China |
|---|---|
| Productivity: | 20000 Piece/Pieces per Month |
| Supply Ability: | 20000 Piece/Pieces per Month |
| Payment Type: | L/C,T/T,D/P,D/A,Paypal |
| Incoterm: | FOB |
| Transportation: | Air,Express |
| Port: | chongqing,, |
Product Description
Product Description
Motorcycle turn signal lamp of whole vehicle accessories
The flashing frequency of the turn signal lamps of motorcycle vehicle accessories shall be on/off for an equal time. If the flashing frequency of the thermal resistance flasher is too high, it must be adjusted. The method is as follows: bend the resistance wire bracket downward with pointed nose pliers to reduce the gap between the suction piece and the magnet. The larger the gap between the suction piece and the magnet, the higher the flash frequency; On the contrary, the flash frequency is lower. During adjustment, it shall be adjusted and tested until the flash frequency reaches the standard requirements. For capacitive and transistor scintillators, if they are damaged in use, they cannot be adjusted. If they are abnormal, they should be replaced with new components. Check the buzzer. When the motorcycle steering switch is toggled, the steering lamp will light up but the buzzer will not sound. Check the contact clearance of the buzzer. If it is incorrect, remove the buzzer, polish the contact with fine sandpaper, and then turn the steering lamp switch to adjust the contact clearance until the sound of the buzzer is normal.
The flashing frequency of the turn signal lamps of motorcycle vehicle accessories shall be on/off for an equal time. If the flashing frequency of the thermal resistance flasher is too high, it must be adjusted. The method is as follows: bend the resistance wire bracket downward with pointed nose pliers to reduce the gap between the suction piece and the magnet. The larger the gap between the suction piece and the magnet, the higher the flash frequency; On the contrary, the flash frequency is lower. During adjustment, it shall be adjusted and tested until the flash frequency reaches the standard requirements. For capacitive and transistor scintillators, if they are damaged in use, they cannot be adjusted. If they are abnormal, they should be replaced with new components. Check the buzzer. When the motorcycle steering switch is toggled, the steering lamp will light up but the buzzer will not sound. Check the contact clearance of the buzzer. If it is incorrect, remove the buzzer, polish the contact with fine sandpaper, and then turn the steering lamp switch to adjust the contact clearance until the sound of the buzzer is normal.
Related Keywords
Related Keywords
You May Also Like
You May Also Like
