Changan Eado 16 headlights

How to remove the Changan Eado headlight in Auto Parts? Where is the low beam in Changan Eado Automotive Lighting System and how to remove it

 

Before disassembly, please prepare an 8mm wrench. Then, open the car hood and locate the low beam to be disassembled. Generally speaking, the low beam is placed in the headlight cover. Then, with the help of a wrench, remove the three fixing screws on the lampshade one by one. Specifically, one of the screws is hidden near the bulb interface of the left lamp, and the remaining two are distributed in the door frame between the left door hinges and the right door opening. After successfully removing the screws, the lampshade can be easily removed to expose the bulb inside. If you plan to replace the bulb, you can follow the following process:

Carefully unplug the wire connector on the Changan Car lampshade, and then remove the old bulb from the socket. Then, insert the new bulb into the corresponding socket and make sure it is firmly installed. Finally, restore the lampshade to its original position and make sure all parts are properly fixed.

 

 

During this process, please be careful and patient to avoid unnecessary damage to the lampshade or bulb. For friends who are not familiar with this type of operation, we recommend that you seek the assistance of professional auto repair personnel to ensure the safety and accuracy of the operation.