
Leading technology hydraulic oil recovery plant,prolonging oil service life,fast dewater,degas
- Payment Type:
- T/T, L/C
- Incoterm:
- FOB
- Min. Order:
- 1 Set/Sets
- Min. Order:
- 1 Set/Sets
- Delivery Time:
- 10 Days
- Transportation:
- Ocean, Land, Air
Your message must be between 20 to 2000 characters
Contact NowPlace of Origin: | China |
---|---|
Productivity: | 100sets/m |
Payment Type: | T/T,L/C |
Incoterm: | FOB |
Certificate: | CE,ISO9001 |
Transportation: | Ocean,Land,Air |
Specifications
1.Stronger Demulsification
2.Stronger Dehydration
3.Stronger degassing
4.RE-impurity
Leading technology hydraulic oil recovery plant,prolonging oil service life,fast dewater,degas
Features:
1. Double primary filters structure, three-stage filtration system (primary filter, seconday filter, fine filter) with gradually incresing filtration precision, removing impurities as much as possible.
2. Large area three-dimensional flash distillation technology, removing gas and water efficiently.
3. Strong ability of demulsification, separating oil and water efficiently.
4. Humanized design, all necessary control buttons and indicator lights are equipped on the control panel which provides easy control for operation and supervision.
5.High-efficiency electric heating system, controlled by automatic constant temperature controller, heating the oil uniformity, avoiding oil deterioration, less power consumption.
6. Equipped with double-infrared oil level controller: During the running of the machine, it will control the oil pump start and stop automatically, ensuring the balance between oil inlet and outlet.
7. Equipped with pressure controller: During the running of the machine, if the working pressure exceed the setting value, the machine will stop running automatically.
8. Equipped with emergency stop switch: During the running of the machine, if there has any emergency situation, the machine will stop running immediately.
9.Interlocking protection mechanism, connecting vacuum pump and heater, avoiding blank pumping, blank heating, safe and reliable.
Technical Parameters:
Parameters |
Unit |
TYA-10 |
TYA -20 |
TYA -30 |
TYA -50 |
TYA -100 |
TYA -150 |
TYA -200 |
TYA -300 |
Flow rate |
L/h |
600 |
1200 |
1800 |
3000 |
6000 |
9000 |
12000 |
18000 |
Vacuum degree |
Mpa |
-0.06 ~- 0.095 |
|||||||
Working pressure |
Mpa |
≤0.4 |
|||||||
Temperature degree |
°C |
0~100 |
|||||||
Power supply |
|
3Phase, 380V, 50Hz(or as needed) |
|||||||
Working noise |
dB(A) |
≤75 |
≤75 |
≤75 |
≤78 |
≤78 |
≤78 |
≤80 |
≤82 |
Electric heating power |
kW |
36 |
40 |
45 |
72 |
80 |
90 |
120 |
135 |
Total electric power |
kW |
38 |
42 |
47 |
75 |
87 |
101 |
135 |
147 |
Inlet (outlet) caliber |
mm |
25 |
25 |
25 |
32 |
42 |
50 |
50 |
60 |
Size |
mm |
1500x1000x 1600 |
1500x1050x 1600 |
1500x1050x1650 |
1600x1150x1700 |
1750x1150x1750 |
1900x1600x1950 |
1950x1600x1950 |
2100x1600x2000 |
Weight |
Kg |
350 |
380 |
400 |
450 |
550 |
650 |
700 |
750 |
Guarantee Value
Item |
Guarantee indexes |
Moisture content |
≤50 PPM |
Demulsification value |
New oil≤15min,running oil≤30min |
Impurity size |
≤1 micron |
Gas content |
≤0.1% |
Working Principle
When it starts working, the used oil will be poured into the heater to heat under the vacuum pressure, then the heated oil enter into the primary filter which will eliminate the big impurities, then the oil enter into the vacuum separator, the oil will flow the special radiation device, which make the unit/volume oil to produce a large surface area, lets the pollution oil exposure in the low humidity atmosphere, thus the water, air and gas can be eliminated. The treated vapor and gas form the gaseous mixture becomes the liquid through the water tank and the chiller condensation, then the liquid enters water receiver together, the vacuum extracts the surplus gas.
The oil which is drained away water flow into precision strainer where can exhaust particulates (oil purification). According the quantity of the water content, a whole purification needs many times circulation to drain away the water.
Oil Data after Treatment
Moisture (water content) |
≤80 PPM (remove 100% of free water and 95%of dissolved/emulsified water) |
Gas Content |
≤0.01% |
Suspended Particles (Filtration precision) |
≤1 ~ 5 micron |
Demulsification |
New oil≤15min, running oil≤30min |
Cleanliness |
≤NAS 1638 Grade 5 |
If you are interested in our oil purifiers,please contact us by email.
Related Keywords